Listen · Find · Cut · Learn

Feedback Trainer

Practice finding the ringing frequency. Move the matching fader down only as much as needed.

Start with your device volume low. Each training sound fades in smoothly so you have time to adjust safely.

Choose a level

Choose session length

Training flow

The ringing tone plays without pink noise. The level meter and live guidance help you learn how far to lower the fader.

My SolAudioLab

Training progress

Keep completed training history in My SolAudioLab so it is available on your other signed-in devices.

Checking account…

New completed training history is saved only in My SolAudioLab. An older Browser Last Session stays unchanged on this device and is available only for signed-in review and import.

Listen Mode

Learn the frequency bands

Raise one fader above the center position to hear that feedback frequency. Move it back to the center to stop the tone.

LevelBeginner

Current BandStopped

Frequency Faders

Only the raised fader plays. Selecting another band stops the previous tone.

0 dB to +15 dB

Raise a fader to hear a band.

Current round

Round 1 / 10

Listen for the ringing tone. Lower the matching band only as much as needed.

LevelBeginner

Pink NoiseOff

FeedbackRising

Ready

GEQ Faders

Cut the ringing frequency. The faders lightly settle at the center position, so unused bands are easier to return to neutral.

+15 dB to -15 dB

Session Report

Final Score

0Beginner

Correct Rate—

Average Response Time—

Frequency Accuracy—

Cut Control—

Unnecessary Moves—

Weak Frequency Range—

Best Frequency Range—

Recommended Next Practice—

Coach Notes

Complete a session to see your feedback control report.

This completed report is temporary in this tab until it is saved in My SolAudioLab.

What this trainer does

This tool helps live sound engineers, rehearsal room users, and musicians recognize feedback frequencies faster. The three levels change the amount of pink noise, visual guidance, and feedback-level variation. You can practice finding the problem band and cutting only what is needed.

How to use it

Start at a low volume. You can use Listen Mode to hear each frequency band before training. Training questions use practical feedback bands from 63 Hz to 8 kHz. During a training session, move the most likely fader down and use Lock In when the feedback feels stable. The final report shows frequency accuracy, response time, cut control, and unnecessary moves. Free Practice lets you keep going until you choose to end the session.